This symbol indicates considerable attention must be paid to
recommendations, regulations, references and correct
sequencing so that damage and/or destruction of the rotary
blower and/or other equipment is prevented.
This symbol indicates environmental protection measures.
This symbol indicates manual operations that are to be
performed by the operator or service technician.
5.2 Safety warning and regulations (OSHA CFR 29, 19100)
Observe the following warnings when operating rotary
blowers:
z
Because of danger to maintenance and operation personnel from rotating
parts, high temperatures and harmful noise, protective measures against
these hazards must be taken by the user.
z
No open flame or flying sparks should be in the vicinity of unit.
z
If any welding or grinding work is needed near the rotary blower, ensure
that sparks or high temperatures cannot cause fire or explosion.
z
Operating personnel must be instructed on the necessity of wearing
hearing protection during operation of the rotary blower - especially when
operating without the acoustic hood.
z
Do not stay for long periods in the direct vicinity of operating rotary
blowers with damaging noise levels.
-----------------------------------------------------------------------------------------------------------------------------------------------
Sunco Blowers www.suncoblowers.com
Phone: 704-545-3922 Pg. 13
All rights reserved. No part of this manual may be reproduced in any form by any
means without permission from
Sunco Blowers
