blower to the structure using the mounting feet provided prior to moving the unit.
7.3 Handling with a Crane Hook
When lifting the rotary blower with a crane hook and slings, use the two Lifting Lugs
provided to distribute the load evenly.
x
When transporting the rotary blower with a crane, all
standard safety practices and regulations regarding this
type of operation must be observed.
x
Do not stand below a hanging load.
x
Do not exceed the maximum permissible lifting weight
specified for the lifting device and rigging elements.
x
Avoid sudden, sharp vertical movements when lifting,
lowering and transporting the rotary blower.
x
Lift no higher than needed.
7.4. Storage
7.4.1 Temporary Storage
If the unit will need to be stored for a short period of time, or there is a long period of
time between delivery and installation, store the rotary blower in a dry, covered space.
Leave the flanged ports blanked off to prevent contamination of the internal surfaces.
Keep the unit off of the ground.
7.4.2. Storage for longer than one year
Use Temporary Storage 7.4.1 recommendations plus:
z
Apply rust inhibiting oil/grease onto the flanged ports, drive shaft, and any other
base metal to protect against corrosion.
z
Isolate from secondary vibration
z
Change oil annually.
Rotate shaft periodically (a few times biweekly is recommended)
-----------------------------------------------------------------------------------------------------------------------------------------------
Sunco Blowers www.suncoblowers.com
Phone: 704-545-3922 Pg. 16
All rights reserved. No part of this manual may be reproduced in any form by any
means without permission from
Sunco Blowers
