Auto Off
Auto Off conserves energy by automatically turning off each side of the
Mattress Pad after 10 hours of use. This is the factory default setting, and the
display will read “Auto Off” when this feature is active.
1
To deactivate Auto Off, press the “Auto
Off/Stay On” button on the remote control.
The display will then read “Stay On”, and
the Mattress Pad will remain on until you
turn it off using the “On/Off” buttons.
2
To reactivate Auto Off, press the “Auto
Off/Stay On” button on the remote control.
NOTE:
After a power outage, turn the remote off, then
turn it on again to turn the mattress pad back on. The
timer of the Auto Off feature automatically resets, but
your personal heat settings are maintained.
NOTE:
After a power outage, all timers (including
preheat) are reset.
OPERATING INSTRUCTIONS
Auto Off Deactivated
Auto Off Activated
16
For questions or support, please visit:
www.sunbeam.com
R&R_MattressPad_IB-single
12:21 PM Page 31
