For questions or support, please visit:
www.sunbeam.com
13
Turning the Mattress Pad ON and OFF for 2 Users
To turn on each side of the Mattress Pad individually press the “On/Off” button
on the Blue or Green side. When on, the base unit will beep once, the display
for the selected side will light up. On remote, all zones will appear outlined.
NOTE:
The backlight turns off after one minute to save battery power, but the Mattress Pad
remains on. To turn the backlight on again, touch any button on the control other than the
“On/Off” buttons.
Your customized heat settings are stored in memory so the next time you turn
it on, the Mattress Pad returns to the same preferences as the last session.
CAUTION:
Always turn the Mattress Pad “Off” when not in use.
Adjusting all Green
or Blue Zones at Once
Your Mattress Pad features 10
adjustable heat levels per zone.
Press the “+” button on the Green or
Blue side to adjust heat settings. That
side’s zones will change together in
the same increments.
The display shows each zone’s heat
setting: 1 through 9, and then H, which
is the warmest setting. A “ – ” on the
display indicates that the heat for that
zone is turned off.
OPERATING INSTRUCTIONS
Highest Heat
Heat is Turned Off
for this zone
R&R_MattressPad_IB-single
12:21 PM Page 25
