![background image](http://html.mh-extra.com/html/sunbeam/3956/3956_instruction-manual_1394073008.webp)
A
W
ORD ON
W
ATER
This iron is specially designed to use tap water. In areas of the country where the water is
very hard, distilled water is recommended for your iron. If you use distilled water in your iron,
you should periodically use a tank of tap water to keep your iron properly conditioned.
DO NOT use water passed through home water softening systems because such water contains
minerals that may be harmful to the iron.
U
SING
As
A
D
RY
I
RON
The iron can be used on the dry setting with or without water in the tank. Avoid having the tank
too full of water while dry ironing.
l
Slide the temperature control to OFF before plugging the cord into a 120 volt,
AC electrical outlet.
l
Push down or slide button to the DRY/FILL position. Move the temperature control
to the appropriate fabric setting.
l
If you are starting with a cool iron, let iron heat in the upright position on the heel rest. If the iron
is already hot, be sure to cool or heat the iron to a suitable temperature for the fabric you are
about to iron. Try it on an area of the garment where it will not show, such as a seam or facing.
U
SING
AS
A
S
TEAM
IRON
When using as a steam iron, be sure the temperature setting is within the STEAM range on the
temperature selector to avoid water spotting on garment.
l
Slide the temperature control to OFF. Push down or slide button to the DRY/FILL position.
Fill the iron with water. (See TO FILL THE WATER TANK instructions.)
l
Plug the cord into a 120 volt, AC electrical outlet.
l
Move the temperature control to the appropriate fabric setting. Allow 2 minutes for the iron to
reach the desired temperature.
l
After iron has reached desired temperature, push down or slide button to the STEAM position.
If the unit fails to steam after depressing the steam slide button, gently tap the soleplate on the
ironing surface. This will aid in starting the steaming action.
l
When steam ironing, if the temperature control setting is accidentally lowered, water may
appear on the soleplate, indicating that iron temperature has dropped below steaming level.
If this should occur, select DRY/FILL setting. Then, reset temperature control to desired level.
Rest the iron on its heel rest for 1 minute to allow it to reach temperature.
If your iron starts losing its flow of steam and you wish to continue steam ironing, you may refill
without cooling the iron, Turn the iron off. Follow the TO FILL THE WATER TANK instructions.
Add water only to the maximum fill line to prevent overflow.
Содержание 3956
Страница 46: ...NOTES NOTAS ...
Страница 47: ...NOTES NOTAS ...