E4
For questions or support, please visit www.sunbeambedding.com.
E5
For questions or support, please visit www.sunbeambedding.com.
STEP
1
Connect the control
cord to pillow
module.
STEP
2
STEP
3
STEP
4
Place the Heated
Body Pillow with
the connector end
closest to the foot of
the bed.
Route the power cord
away from your body
and under the bed.
Plug power cord into
Wall.
Warning:
THIS HEATED BODY PILLOW IS A SUPPLEMENTARY PILLOW. DO NOT USE IN PLACE OF YOUR
REGULAR PILLOW.
Do not return this product to the place of purchase.
PLEASE follow these directions in the order they are given to ensure your
product will work correctly. Do not turn on the product until it has been fully
assembled.
QUICK SET-UP
GUIDE
Heated Body Pillow
DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
If you have any questions while setting up or using your product, please visit us on the World
Wide Web at: www.sunbeambedding.com or contact Sunbeam Consumer Care in the U.S. at
(800) 892-7684 or in Canada at (800) 667-8623.
CAUTION:
Do not plug main power cord into the wall outlet until you have
completely set up your heated product per the instructions.
• Disconnect power cord from wall before detaching control from heated
product.
• Always make sure cords and controls are NOT trapped or pinched between bed slats,
mattress, springs, against wall, foot board or bed frame, or between furniture, walls
or chairs.
CAUTION:
Do not attempt to force the plug. This appliance has a polarized plug (one blade is
wider than the other). To reduce the risk of electrical shock, this plug is intended to fit only one
way into an outlet. If the plug does not fit in the outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. Do not attempt to defeat this safety feature.
IMPORTANT
Heated Body Pillow Setup
1. Place the body pillow on the bed with the connector side towards the foot of bed facing downward.
a. Note- If using a pillow case, leave connector side exposed on open end. If using a pillow case with a
zipper, leave sufficient space for control cord.
2. Connect the control cord into the module at the bottom of the heated pillow until the two pieces are
securely connected.
CAUTION:
Cord must be COMPLETELY CONNECTED. A risk of fire could result from a loose connection.
3. Run the Power Cord away from your body and under the bed. Do not sandwich cord between the
mattress and box spring. Avoid any tangling or pinching.
4. Plug power cord into a 110-120 volt wall outlet.
CAUTION:
Do not plug main power cord into the wall outlet until you have completely set up your heated
product per the instructions.
• Do not use heated body pillow in positions where cords and controls are near the head, neck, or
upper body.
• Disconnect power cord from wall before detaching control from heated product.
• Always make sure cords and controls are NOT trapped or pinched between bed slats, mattress,
springs, against wall, foot board or bed frame, or between furniture, walls or chairs.
• Do not use with generator power or inverter.
Warning:
•
THIS HEATED BODY PILLOW IS A SUPPLEMENTARY PILLOW. DO NOT USE IN PLACE OF YOUR REGULAR
PILLOW
Low
Med
10 Hour
Auto-Off
Hi
Select / Off
Using your Heated Body Pillow Control
1. To turn on the heated body pillow press the button in the middle of the
control. The indicator light will glow, depending on which setting the heated
pillow is set, and the pillow will begin to warm.
CAUTION:
ALWAYS turn the heated pillow “OFF” and disconnect the power
cord from the outlet when not in use.
2. To turn the heated body pillow OFF press the button through the different
settings until the temperature setting lights are not glowing. The heated
pillow controller comes with 10 hour “Auto-Off” feature designed for
conservation of energy by automatically turning your pillow off after 10
hours of continuous use.
Low
Med
10 Hour
Auto-Off
Hi
Select / Off
Low
Med
Auto-Off
Hi
Select / Off
20” X 54”
Control cord
connector
module
3
2
1
4
pillow module
pillow
connector
Connector must
align with module
to secure into
place
Low
Med
Auto-Off
Hi
Select / Off
heated pillow
controller
control cord
Low
Med
10 Hour
Auto-Off
Hi
Select / Off
20” x 54”
1
3
2
Содержание 2127865
Страница 1: ...Heated Body Pillow U S E R M A N U A L Includes QUICK SET UP GUIDE page 4 P N 197874 Rev A...
Страница 6: ...E10 For questions or support please visit www sunbeambedding com Notes...
Страница 12: ...S10 Si tiene alguna pregunta o requiere asistencia por favor visite www sunbeambedding com Notas...