Sun Oracle Sun Blade 6048, Примечания к продукту

Страница: 11 / 42

Chapter 1 Fixed and Open Issues 3
Fixed in ILOM 3.0.3.32 (Sun Blade 6000 Chassis SW 3.0)
“CMM
OK
LED Turns Off During Boot (6474460)” on page 27 Fixed No
“ILOM CMM SP Does Not Display Current Status Information (6516108)” on page 28 Fixed No
“/CH/LOCATE Does Not Turn Off When Set to ON Using the ILOM CLI or ipmitool
(6695802)” on page 28 Fixed No
“Locate LED Does not Turn on During Chassis Lamp Test (6713569, 6711416)” on page 28 Fixed No
“SP Reports Incorrect FM, NEM, and Server Module Removal and Insertion Events
(6744044)” on page 28 Fixed No
“SP Login Through Web Interface Fails After a New IP Address Is Assigned (6745118)” on
page 29 Fixed Yes
“Cannot Set Netmask When Running ILOM 2.0.3.10 (6766379)” on page 29 Fixed No
“Stop, Start and Reset Commands are Disabled for the Virtualized NEM in the Sun Blade
6000 CMM (6813859 and 6812683)” on page 30 Fixed No
Fixed in ILOM 2.0.3.10 (Sun Blade 6000 Chassis SW 2.1)
“Power LED Does Not Display Until SP Boots (6464862)” on page 30 Fixed No
Fixed in ILOM 2.0.3.3 (Sun Blade 6000 Chassis SW 2.0)
“The
stop /CH
Command Lights the Chassis Alert LED (6678328)” on page 31 Fixed No
“SNMP Trap Destination Port Should Be Configurable (6654887)” on page 31 Fixed No
Documentation Open Issue
“Service Processor Information Missing From Installation Guide (6692166)” on page 33 Fixed No
TABLE 1
Sun Blade 6048 Modular System Issues
Issue Status
Workaround
Available?