Sun Oracle Sun Blade 6000, Руководство по планировке объекта

Страница: 19 / 32

13
Rackmounting Considerations
This section describes information that you need to consider when planning to
rackmount the systems.
These topics are covered in this section:
■
“Mounting the Chassis in a Rack” on page 13
■
“Compatible Cabinets” on page 13
■
“Number of Chassis Supported in a Rack” on page 14
Mounting the Chassis in a Rack
You should use a mechanical lift to install the chassis into the rack. To install the
chassis manually, you will need four people. Refer to the
Sun Blade 6000 Rack
Alignment Template, for specific instructions on rackmounting the chassis. This
document is available at:
http://www.oracle.com/pls/topic/lookup?ctx=sb6000&id=homepage
Compatible Cabinets
The chassis is designed for rackmounting. It can be mounted into 19-inch EIA-310D
cabinets with a depth of 35.4 to 39.4 inches (90.0 to 100.1 cm). The chassis can
accommodate corresponding front-to-back, rail-to-rail spacing of 26.77 inches
(68.0 cm) to 34.25 inches (87.0 cm).
Oracle offers EIA 310D-compliant cabinets for mounting the Sun Blade 6000 modular
system. The Sun Rack 1000 cabinet family is among the newer cabinets from Oracle.
These cabinets are designed to hold three Sun Blade 6000 modular system (Sun Rack
1000-38) or four Sun Blade 6000 modular systems (Sun Rack 1000-42). The following
table lists the physical specifications for the Sun Rack 1000 cabinets.