Sun Oracle Sun Blade 6000, Руководство по планировке объекта

Страница: 14 / 32

8 Site Planning Guide for Sun Blade 6000 and Sun Blade 6048 Modular Systems • February 2012
■
If you are connecting the system to a (rack internal) modular power system, use
this type of power cord: IEC320-C19 to IEC320-C20 – 1.5 meter, Oracle part
number X5046A-Z; 2.0 meter, Oracle part number X5047A-Z
Grid Redundancy
You can configure the Sun Blade 6000 modular system for grid redundancy by using
two AC line feeds and the appropriate modular power system.
Grid redundancy refers
to the performance of the chassis power subsystem in the intended AC configuration.
For grid redundancy, the AC configuration is supplied by AC power from two
independent feeds, which can be called Line A and Line B. When you connect one
power supply to the Line A feed and one power supply to the Line B feed, the
system can tolerate the failure of one power supply or the complete loss of either AC
feed.
Cooling Requirements
Every watt of power used by the system is dissipated into the air as heat. The upper
limit of thermal power dissipation of the chassis in 6250W 2N configuration is 21,325
BTU/hr. This requires that the data center
HVAC system must accommodate the
maximum heat release of a fully configured system, as well as any other systems in
the data center.
Location
Oracle Part
Number
Quantity Length Connections
Americas Domestic X5044A-Z 4 4 meters NEMA L6-20P to
IEC320-C19
Americas Domestic X5915A-N
*
* Requires X5044A-Z. Order Qty 2 X5915-N for each X5044A-Z ordered
2 4 meters NEMA L6-30P to
NEMA L6-20R
International X5045A-Z 4 meters IEC309, 16A, 3 pin to
IEC320-C1