Sun Oracle SPARC T4-1B, Руководство по установке

Страница: 33 / 58

27
Powering On the Server Module for
the First Time
After you install the server module in the modular system, you power on the server
module host for the first time.
Based on the connection method you selected from “Plan Communication With the
Server Module During Installation” on page 15 , perform one of the tasks in this table
to power on the server module:
Related Information
■
“Configuring the Oracle Solaris OS” on page 37
■
“Installation Task Overview” on page 1
■
Server Module Administration Guide
Description Links
Through a browser that is on the same
network as the CMM, use the CMM ILOM
web interface. “Method 1a – Power On the Host Through
the CMM (Web Interface)” on page 28
Through a terminal window on a system that
is on the same network as the CMM, use the
CMM ILOM CLI. “Method 1b – Power On the Host Through
the CMM (CLI)” on page 29
Through a terminal device connected to the
CMM SER MGT port, use the CMM ILOM
CLI. “Method 2 – Power On the Host Through the
CMM SER MGT Port (CLI)” on page 31
Through a terminal device connected to the
front panel of the server module (using the
dongle cable), use the server module SP
ILOM CLI. “Method 3 – Power On the Host Through the
Front Panel (SP CLI)” on page 34