Sun Oracle SPARC T4-1B, Руководство по установке

Страница: 34 / 58

28 SPARC T4-1B Server Module Installation Guide • May 2012
▼
Method 1a – Power On the Host
Through the CMM (Web Interface)
You connect to the CMM through the RJ-45 NET MGT 0 Ethernet port. While this
Ethernet connection supports both the CLI and the web interface to the CMM, this
procedure uses the web interface. By default, the server module is configured to use
DHCP to obtain the IP address for the SP.
1. Ascertain the IP addresses for the CMM.
2. Ensure that the CMM is connected to the network you are on.
The network connection is through the RJ-45 connector labeled NET MGT 0 on the
CMM.
3. In a browser on the same network as the modular system, enter the IP address
of the CMM.
For example, if your CMM has the IP address
129.99.99.99
, enter
http://129.99.99.99
into your browser.
A login window for ILOM appears.
4. Log into ILOM on the CMM by typing your user name and password.
The factory default ILOM
root
password is
changeme
, but might have been
changed in your environment.
You are logged in to the CMM ILOM web interface.
5. If the Chassis View (image of the modular system) is not displayed in the web
interface, select the Chassis entry in the left navigation panel.
6. Use one of the following methods to navigate to the server module SP.
■
Select the newly installed server module in the Chassis View (image) of the
modular system.
■
In the left Chassis navigation panel, select the newly installed server module
(listed as Blade 0 - 9).
7. If prompted to log in, enter the following factory default user name and
password:
■
User name: root
■
Password: changeme
You are now connected to the server module SP.
8. Open a Remote Console.