Sun Microsystems Sun Netra CP3260, Руководство пользователя

Страница: 136 / 144

B-4 Netra CP3260 Blade Server User’s Guide • April 2009
Example (Terminal Mode):
[B8 00 88 00 00 2A] <------
Request
[BC 00 88 00 00 00 2A 01] <------Response
B.3 Solaris OS Graceful Shutdown
Commands
Users can change the graceful shutdown time out of Solaris OS with an IPMI
command executed from ShMM or a user application. Note that this setting is not
persistent; the Solaris FSM will overwrite it after every Solaris OS boot.
SUNWctfsm is the Solaris FSM for ATCA graceful shutdown and reboot. For
installation and requirements, refer the README file included in the release
package and the
Sun Netra CP3260 Blade Server Product Notes (820-0455).
The commands and parameters are described in the following table.
Any parameter changes you make will become effective only after you execute the
Solaris command
svcadm restart fsm
.
TABLE 1
Solaris OS Graceful Shutdown Parameters in
/etc/fsmd.conf
Parameter Description and Parameters
GS_SHUTDOWN_TIMEOUT
Sets the payload graceful shutdown timeout in increments
of 100 milliseconds. The legal value range is from 0 to
0xffff (0 second to 6553 seconds).
The default value is 1200, which is 120 seconds. This 1200
will overwrite the default value 300 in IPMC.
Solaris might panic during graceful shutdown if this
parameter value is too short. Conversely, if this value is
too long, the shutdown could take too long. See Note that
follows this table.
GR_COMPLETION_NOTICE
Determines if Solaris FSM will send a reboot succeed
notice to IPMC. The legal values are yes and no.
The default value is no. IPMC might or might not
support/use it.
GR_TIMER_DISARM
Determines if Solaris FSM will disarm graceful reboot
timer. The legal values are yes and no.
The default value is no. Set to yes only if the blade server’s
firmware has no graceful reboot support.