Chapter 2
Setting Up the Sun Fire X2250 Server Software
23
▼
To Configure Static IP Addresses Using the BIOS Setup
Utility
1. Enter the BIOS Setup utility by pressing the F2 key while the system is
powering on and performing the power-on self-test (POST).
2. When the BIOS Main menu screen is displayed, select
Advanced
.
3. From the Advanced menu screen, select
IPMI 2.0 Configuration
.
4. From the IPMI 2.0 Configuration screen, select
LAN Configuration
.
5. From the LAN Configuration screen, select
IP Address
.
6. From the IP Address screen, select
IP Address Mode
.
7. On the IP Address Mode screen, select
Static
.
8. Type the static IP address in the
IP Address
field.
Click
ESC
to go back and enter the subnet mask and default gateway settings in
their respective fields.
9. Select
Commit
and press Enter to commit the changes.
10. Select
Refresh
and press Enter to see your new static IP settings displayed in
the
Current IP address in BMC
field.
11. Press and release the right arrow key until the Exit menu screen is displayed.
12. Follow the instructions on the Exit menu screen to save your changes and exit
the BIOS Setup utility.
