Sun Microsystems Sun Fire V880z, Инструкция по установке и эксплуатации

Страница: 41 / 128

Chapter 4 Installing the Sun XVR-4000 Graphics Accelerator Hardware 25
12. Grasp both ejector levers and rotate them inward simultaneously.
Avoid rocking the board in the card guides. The board has a tendency to pull to the
left (front) side of the chassis (as viewed from the CPU module/Sun XVR-4000
graphics accelerator side). Installation should be smooth and uniform.
13. Once the ejector levers are fully rotated in, hand tighten both captive screws.
Note – It is important to try to hand tighten prior to using a torque driver.
14. Using a No. 2 Phillips screwdriver or torque driver, tighten the right-side captive
screw and then the left-side captive screw.
If using a torque driver, fully seat the right-side captive screw first to 8 in-lbs
(0.90 meter-newtons), then repeat for the left-side captive screw.
15. Secure the back panel I/O slot EMI adapter to the slot now containing the
Sun XVR-4000 graphics accelerator (
FIGURE 4-6
).
Secure the EMI adapter with the four Phillips screws used for the back panel filler
cover.
FIGURE 4-6
Installing the Back Panel EMI Adapter on the Server Back Panel I/O Slot B
16. Attach the appropriate monitor cables to the Sun XVR-4000 graphics accelerator
backplate on the system back panel.
Back panel
EMI adapter