Sun Microsystems Sun Fire V100, Руководство пользователя

Страница: 90 / 146

72 Sun Fire V100 Server User’s Guide • December 2001
▼
To View the Event Log (
lom -e
)
● To see the event log, type:
where n is the number of reports (up to 128) that you want to see and x specifies the
level of reporting you require. There are four levels of event reporting:
1. Fatal events
2. Warning events
3. Information events
4. User events
If you specify a level, you will see reports for that level and above. For example, if
you specify level 2, you will see reports of level 2 and level 1 events. If you specify
level 3, you will see reports of level 3, level 2, and level 1 events.
If you do not specify a level, you will see reports of level 3, level 2, and level 1
events.
FIGURE 6-1
shows a sample event log display. Note that the first event is the oldest
and that each event has a date stamp indicating the days, hours and minutes since
the system was last booted.
System status flags (circuit breakers):
1 USB0 status=ok
2 USB1 status=ok
3 SCC status=ok
System Temperature Sensors:
1 Enclosure 27 degC : warning 67 degC : shutdown 72 degC
System Over-temperature Sensors:
1 CPU status=ok
Console output prior to last reset:
# lom -e
n
,[
x
]
CODE EXAMPLE 6-1
Sample
lom -a
output
PSUs: