Sun Microsystems Sun Fire V100, Руководство пользователя

Страница: 75 / 146

Chapter 5 Managing the Sun Fire V100 Server From the
lom>
Prompt 57
By default, all four areas of authorization are available to each named user you set
up. You can limit users to a particular area or areas of authorization by specifying
permissions for a named user.
▼
To Specify Permissions for a Named User
● Type:
You can specify:
■
All four parameters (for example,
userperm cuar
)
This also makes all four areas available to the named user.
■
One, two, or three parameters
This makes only the parameter or parameters you specify available.
The parameters are:
■
c
This stands for “console permission”. It enables the named user to exit from the
lom>
prompt to the Solaris prompt (as long as the Serial A/LOM port is shared
between LOM and the console).
■
u
This stands for “user administration permission”. It enables the named user to
add and delete users and alter their areas of authorization by using the
userperm
command.
■
a
This stands for “administration permission”. It enables the named user to change
the LOM device’s configuration variables (see “Setting the LOM Configurable
Variables” on page 58).
■
r
This stands for “reset permission”. It enables the user you have named to reset
the server and to power it on and off using the LOM device.
■
-
Use this character to specify that no permissions are assigned.
lom> userperm
username
[c][u][a][r][-]