Sun Microsystems SUN FIRE 280R, Руководство по установке и монтажу в стойку

Страница: 12 / 42

4 Sun Fire 280R Server Setup and Rackmounting Guide • January 2001
Use the key for controlling the system in “Setting Up the System” on page 19. The
wrist strap is not needed for the rackmounting procedures. Both the key and the
wrist strap are needed for procedures described in the
Sun Fire 280R Server Service
Manual and the Sun Fire 280R Server Owner’s Guide .
The accessory box includes a plastic bag of hardware containing screws, nuts, and
washers that are shown below in actual size.
You need 8 of the 10-32 x 3/4 screws to attach the slide assemblies to the rack. After
installing the slide assemblies, any unused hardware is a spare piece.
Note –
Bar nuts are not used in Sun rack enclosures. Bar nuts are required (but not
included) for non-threaded rack enclosures. See your rack enclosure instructions for
more information.
(10-32 x 3/4)
Screws Flat
washer (8-32)
Locking
nut (8-32)
(spare) (spare)