Sun Microsystems Sun Expert3D, Руководство по установке

Страница: 53 / 54

Appendix A Sun Expert3D Graphics Card Features and Specifications 37
3. Connect the frame lock multiview cable to each Sun Expert3D graphics card
(
FIGURE A-3
).
a. Connect the top of the multiview frame lock cable assembly to the
multiview-out J2 connector of the master Sun Expert3D card.
b. Connect the other end of the multiview frame lock cable to the multiview-in J1
connector of the slave Sun Expert3D card.
FIGURE A-3
Sun Expert3D Multiview-In and Multiview-Out Connectors
4. From the master Sun Expert3D graphics card display window, configure the other
Sun Expert3D graphics card in slave mode.
To do this, use the
fbconfig
command.
You must configure each card separately.
In order to reconfigure your Sun Expert3D graphics card from slave mode back to
master mode, do one of the following:
■
Power cycle the system.
■
Use the
fbconfig
command. For example:
You must configure each card in slave mode separately.
% fbconfig -dev /dev/fbs/ifb1 -slave on
% fbconfig -dev /dev/fbs/ifb1 -slave off
J1 J2