Sun Microsystems StorEdge S1 AC100, Руководство по установке и обслуживанию

Страница: 43 / 128

Chapter 1 StorEdge S1 AC100 and DC100 Overview 7
▼
To Remove the Nameplate on the Bezel
You can stick a label onto the front of the nameplate. This nameplate is removable to
enable you easily to transfer it onto another system. If you want to do this, follow
the instructions below:
1. Press the left end of the nameplate towards the right (see
FIGURE 1-4
).
This releases the left retaining lug and causes the nameplate to swing out from the
bezel.
FIGURE 1-4
Releasing the Left Retaining Lug to Make the Nameplate Swing Out
microsystems