Sun Microsystems StorEdge S1 AC100, Руководство по установке и обслуживанию

Страница: 10 / 128

x StorEdge S1 AC100 and DC100 Installation and Maintenance Manual • March 2002
Depending on the type of power switch your device has, one of the following symbols may be used:
Modifications to Equipment
Do not make mechanical or electrical modifications to the equipment. Sun Microsystems is not responsible for
regulatory compliance of a modified Sun product.
Placement of a Sun Product
Off - Removes AC power from the system.
Standby – The On/Standby switch is in the
standby position.
Caution – Do not block or cover the
openings of your Sun product. Never place
a Sun product near a radiator or heat
register. Failure to follow these guidelines
can cause overheating and affect the
reliability of your Sun product.
Caution – The workplace-dependent noise
level defined in DIN 45 635 Part 1000 must
be 70Db(A) or less.
Caution – If the system is installed in a
closed or multi-unit rack assembly, the
operating ambient temperature of the rack
environment may exceed the room ambient
temperature. Ensure that the rack
environment ambient temperature does not
exceed the system’s environmental
specifications. See “Environmental
Specifications” on page -86.
Caution – When mounting the equipment in
a rack or cabinet, make sure that the system
is securely mounted to the rack. If the
weight of the system is distributed
unevenly, it may cause a hazard to humans
or equipment.