18
Sun StorEdge N8600 Filer Storage Upgrade Guide • September 2001
3. Access the
/etc
directory using the
cd
command.
4. Access your working directory on the server where the newly created
syslog.conf
file exists using the
lcd
command.
5. Type
binary
to set the transfer mode.
6. Copy the
syslog.conf
file from your working directory to the
/etc
directory
on the array using the
put
command.
7. Exit the FTP session using the
bye
command.
8. Access the array by either a Telnet session or a serial connection.
9. Reboot the array by typing the following:
10. Repeat
“Adding the Server’s IP Address” on page 15
for each MCU and for each
alternate MCU array of all partner groups that you installed.
ftp> cd /etc
250 CWD command successful.
ftp>
ftp> lcd /tmp
Local directory now /tmp
ftp>
ftp> put syslog.conf
200 PORT command successful.
150 ASCII data connection for syslog.conf (192.148.226.11.34511)
226 ASCII transfer complete.
local: syslog.conf remote: syslog.conf
20 bytes received in 0.0021 seconds (94.81 Kbytes/s)
ftp>
ftp> bye
221 Goodbye.
#
disk7:/: /etc:<
n
> reset
Reset the system, are you sure? [N]: Y