Sun Microsystems StorageTek T9840, Руководство пользователя

Страница: 84 / 110

Messages
84 T9840 User’s Reference Manual • September 2008 Revision YA • 95739
Potential Operator Recovery Scenarios
The following table contains Fault Symptom Codes (FSCs) that commonly result from
an operator error. The first column in the table lists an operator panel message at the
time of the error event. The description column provides insight into the error
condition from which you should be able to determine a recovery action.
TABLE 5-3
Selected Check Message Meanings
Message Description
CHK 6109
This drive does not contain the key needed to decrypt this tape.
The ID of the missing key can be viewed from this drive using the VOP program.
The ID has also been written to the Operational Key Token (OKT).
Connect the OKT to the Key Management Station (KMS) and view the error log for
error 6109
CHK A33A
The user requested a motion operation that requires a tape to be installed, however, a
tape has not been loaded.
CHK A34C
The user requested a write operation that requires a tape to be installed, however, a
tape has not been loaded.
CHK A3FB
A format override tape write operation failed. The failure may not be serious. Error
recovery was not invoked for the failure. Re-attempting the test may resolve this issue.
CHK A733
The operator or library inserted a write protected tape into the drive while in a menu
selected create tape mode. If the write protect switch on the cartridge is moved to the
unlocked position, operation will work.
CHK A749
A high densitry tape was attempted to be read on a drive only capable of reading
lower density tapes. Retry with a low density tape.
CHK A74E
A high density tape was loaded on a low density drive, or a low density tape was
loaded on a high density drive. In either case, the drive cannot write to the tape.
The MIR cannot be written on the tape during the unload process so there is no point
in running the build MIR function.
If it is a high density tape, rebuild the MIR on a high density drive.
If it is a low density tape, rebuild the MIR on a low denisty drive.