Sun Microsystems Rack, Руководство по обслуживанию

Страница: 12 / 22

6 Sun Rack Service Manual • November 2002
Removing and Replacing a Power Strip
In order to remove the inner power strip, you must first remove the outer power
strip (the one closer to the back of the rack). The removal procedure for both power
strips is the same.
1. Disconnect the cable from the bottom of the power strip.
2. Loosen the retaining screw at the top of the power strip and pull the top of the
power strip toward the back of the rack.
3. Pull the power strip up and out so that the tab at the bottom of the power strip
clears the bracket.
FIGURE 1-4
Power Strip
To replace a power strip, reverse the steps of the power strip removal procedure.
To replace the inner power strip, the outer power strip must be removed.