Sun Microsystems Netra T4 AC100, Руководство по обслуживанию и системе

Страница: 52 / 284

3-8 Netra T4 AC100/DC100 Service and System Reference Manual • August 2001
Note –
Test failures occur if you run
nettest
and
netlbtest
simultaneously.
3.2.1 Guide to Using SunVTS 4.4
The following guidance notes points are included to help you use SunVTS 4.4.
■
The packages
SUNWeswsa
,
SUNWsycfd
,
SUNWesnta
and
SUNWeswgn
are no
longer required or supplied for physical mapping support.
■
The disktest probe does not premount any partitions by default. You can set the
environment variable
BYPASS_FS_PROBE
to zero to force all unmounted
partitions to premount.
■
Premounting will not take place, even if you have enabled it, if the disktest probe
detects the presence of Veritas or Solstice DiskSuite.
■
If you run a media subtest on a disk partition in WriteRead mode, data corruption
can occur if the partition is shared with other programs.
■
An option file created when
BYPASS_FS_PROBE
was set to 0 may not load when
BYPASS_FS_PROBE
is set to 1. If required, create option files for both states of
BYPASS_FS_PROBE
■
SunVTS (Kerebos SEAM) security is now on by default. To turn security off, edit
the security file
/opt/SUNvts/bin/.sunvts
to include a “+” in the HOST
section. This will make all the listed hosts trusted hosts.
■
Physical mapping is supported only on systems that support
configd
.
■
Do not mix CDE and OpenLook environments.
■
The files
.customtest
and
.customtest_OtherDevices
are separate files in
the 64-bit version of SunVTS. They are installed in
/opt/SUNWvts/bin/spacv9
,
and not
/opt/SUNWvts/bin
as is the case for the 32-bit version.
■
The environment variable
VTS_PM_PATH
is used to locate the pix map files when
SunVTS is not installed in the default base directory (
/opt
).
■
The following tests have been renamed:
■
spif -> spiftest
■
pmem -> pmemtest
■
vmem -> vmemtest
■
The following tests are not supported in 64-bit mode:
■
cg14test
■
isdntest
■
tcxtest
■
The physical map view displays only one level of the hierarchy. To view the
complete hierarchy, use the logical view.
TABLE 3-7
SunVTS Custom Test
Test Function
cpupmtest
This new test checks the CPU power management functionality.