Sun Microsystems Netra 120, Руководство пользователя

Страница: 125 / 200

9-1
C H A P T E R
9
Managing the Server From the
Solaris Prompt
This chapter tells you how to use the LOM-specific commands available in the
Solaris operating environment for monitoring and managing a Sun Fire V120 or
Netra 120 server.
For an introduction to the LOM device and a description of an alternative user
interface to it, see Chapter 8.
The chapter contains the following sections:
■
Section 9.1, “Monitoring the System From Solaris” on page 9-2
■
Section 9.2, “Configuring Automatic Server Restart (ASR)” on page 9-8
■
Section 9.3, “Other LOM Tasks You Can Perform From Solaris” on page 9-11
Note – For information about how to configure the LOM device driver, see
Appendix C.
Note –
The Sun Fire V120 and Netra 120 servers are supplied with the Solaris
operating environment installed and with the supplementary Lights-Out
Management (LOM) software described in this chapter and Chapter 8 also installed.
This software enables you to manage the server locally or remotely. If you ever need
to re-install Solaris and you want to use the Lights-Out Management facilities, you
must also re-install the Lights-Out Management software from the CD entitled
Software Supplement for the Solaris Operating Environment. This CD is included with
the Solaris media kit. For the location of the LOM packages on the CD, refer to the
Solaris Hardware Platform Guide for the release of Solaris that you are using.