Sun Microsystems Fire X4600, Руководство пользователя

Страница: 37 / 52

Sun Fire X4600 to Sun Fire X4600 M2 Server Migration 25
a. Verify that the BIOS version reported matches the last system BIOS version
your worksheet.
b. Verify that the date and time are correct. If not, press F2 to correct them.
c. Press F9 to load the optimal default values.
d. Press F10 (if using the remote console, choose Keyboard/F10) to save and exit.
5. Allow the resulting boot to proceed uninterrupted. The correct number of CPU
modules should be reported this time.
6. Power the system down.
You are now ready to update the LSI HBA BIOS.
Forcing the ILOM Update
▼
To Force the ILOM Update
If your attempts to flash the ILOM keep producing an error, you can try “forcing”
the update. This means that safeguards in the ILOM update process are disabled.
This can only be done from the ILOM command line, using
load
with the
-f
option.
load -f -source tftp://
server
/
filename.ima
Note – The
-f
option “forces” the ILOM to update itself without any safety checks.
In particular, the ILOM does not verify that the image file is appropriate for the
current platform. Do not use the
-f
option except to work around problems flashing
an image. If you do use the
-f
option, make absolutely sure that the image file is
correct for your hardware platform; the ILOM will not prevent you from flashing an
image meant for a different platform.
Clearing CMOS Jumper P2
You can use Jumper P25 to clear the server’s CMOS settings after a system hang. For
example, if the server hangs because of incorrect settings and will not boot, use this
jumper to invalidate the settings and reboot with defaults.