Sun Microsystems Fire X4600, Руководство пользователя

Страница: 23 / 52

Sun Fire X4600 to Sun Fire X4600 M2 Server Migration 11
Caution – Servers not running ACPI-enabled operating systems will shut down to
standby power mode immediately.
■
Emergency shutdown – Press and hold the Power button for four seconds to force
main power off and enter standby power mode.
When main power is off, the Power/OK LED on the front panel begins flashing,
indicating that the server is in standby power mode.
Caution –
When you use the Power button to enter standby power mode, power is
still directed to the GRASP board and power supply fans, indicated when the
Power/OK LED is flashing. To completely power off the server, you must disconnect
the AC power cords from the back panel of the server.
▼
To Remove the Main Cover
1. To remove the cover:
a. Loosen the two captive screws that secure the cover at the rear of the chassis.
b. Using the indent on the cover for leverage, slide the cover toward the rear of
the chassis approximately 0.5 inches (12 mm.). See
FIGURE 3
.
c. Grasp the cover by its edges and lift it straight up from the chassis.
Note –
When you remove the cover, the intrusion switch that is on the motherboard
automatically powers down the system to standby mode.