Sun Microsystems Fire V240, Руководство администратора

Страница: 80 / 102

66 Sun Fire V210 and V240 Servers Administration Guide • April 2003
show-devs
Command
The
show-devs
command lists the hardware device paths for each device in the
firmware device tree.
CODE EXAMPLE 6-5
shows some sample output.
CODE EXAMPLE 6-5
show-devs
Command Output (
truncated)
▼
To Run OpenBoot Commands
1. Halt the system to reach the
ok
prompt.
How you do this depends on the system’s condition. If possible, you should warn
users before you shut the system down.
2. Type the appropriate command at the console prompt.
/pci@1d,700000
/pci@1c,600000
/pci@1e,600000
/pci@1f,700000
/memory-controller@1,0
/SUNW,UltraSPARC-IIIi@1,0
/memory-controller@0,0
/SUNW,UltraSPARC-IIIi@0,0
/virtual-memory
/memory@m0,0
/aliases
/options
/openprom
/chosen
/packages@0,320//packages/terminal-emulator
/packages/disk-label
/packages/deblocker
/packages/SUNW,builtin-drivers ...