Sun Microsystems Fire V240, Руководство администратора

Страница: 41 / 102

Chapter 2 Removing and Replacing Components 27
Removing and Replacing Hard Disk
Drives
Caution – The server and hard disk drives contain electronic parts that are
extremely sensitive to static electricity. Wear a grounded antistatic wrist strap when
you carry out this procedure.
Removing A Hard Disk Drive
The hard disk drives are hot-pluggable modules. If more than one is fitted, you can
install or remove a hard disk drive without powering off the server or removing it
from the rack.
However, you do need to make sure that no system or application software is using
a hard disk drive when you remove it.
Note – If you intend to remove a hard disk drive with Solaris running, follow the
instructions in “Removing a SCSI Hard Disk Drive With Solaris Running” on
page 30 before performing the steps below.
1. Open the front bezel.
See “To Open The Front Bezel” on page 22.
2. Check that the blue indicator LED is lit on the hard disk drive.
The blue LED comes on when the hard disk drive is ready to remove.
3. Slide the catch at the front of the hard disk drive to the right.
This releases the handle on the front of the hard disk drive.
4. Pull the handle and remove the hard disk drive from the server by sliding it out
from its bay.