Sun Microsystems Ethernet MMF/UTP Adapter, Инструкция по установке и эксплуатации

Страница: 69 / 122

Chapter 3 Configuring
ipge
and
e1000
Driver Parameters 35
TABLE 3-4
describes the parameters and settings for the
ipge
device driver.
TABLE 3-4
ipge
Driver Parameter, Status, and Descriptions
Parameter Status Description
instance
Read and write Device instance
adv-autoneg-cap
Read and write Operational mode parameter
adv-1000fdx-cap
Read and write Operational mode parameter
adv-1000hdx-cap
Read and write Operational mode parameter
adv-100T4-cap
Read and write Operational mode parameter
adv-100fdx-cap
Read and write Operational mode parameter
adv-100hdx-cap
Read and write Operational mode parameter
adv-10fdx-cap
Read and write Operational mode parameter
adv-10hdx-cap
Read and write Operational mode parameter
adv-asmpause-cap
Read and write Flow control parameter
adv-pause-cap
Read and write Flow control parameter
master-cfg-enable
Read and write Gigabit link clock mastership controls
master-cfg-value
Read and write Gigabit link clock mastership controls
use-int-xcvr
Read only Use internal transceiver
enable-ipg0
Read and write Enable additional delay before transmitting a packet
ipg0
Read and write Additional delay before transmitting a packet
ipg1
Read and write Interpacket gap parameter
ipg2
Read and write Interpacket gap parameter
rx-intr-pkts
Read and write Receive interrupt blanking values
rx-intr-time
Read and write Receive interrupt blanking values
accept-jumbo
Read and write Enable Jumbo Frames