Summit CP97R-1, Инструкция по эксплуатации

Страница: 4 / 16

3
FOLLOW WARNING CALL-OUTS BELOW ONLY WHEN APPLICABLE TO YOUR MODEL

Use two or more people to move and install the refrigerator. Failure to do so
can result in back or other injury.

To ensure proper ventilation for your refrigerator, the front of the unit must be
completely unobstructed. Choose a well-ventilated area with temperatures
above 60°F (16°C) and below 90°F (32°C). This unit must be installed in an
area protected from the elements such as wind, rain, water spray or drips.

The refrigerator should not be located next to ovens, grills or other sources of
high heat.

The refrigerator must be installed with all electrical, water and drain
connections in accordance with state and local codes. A standard electrical
supply (115-120V AC only, 60 Hz), properly grounded in accordance with the
National Electrical Code and local codes and ordinances is required.

Do not kink or pinch the power supply cord of the refrigerator.

The fuse (or circuit breaker) size should be 15 amperes.

It is important for the refrigerator to be leveled in order to work properly. You
may need to make several adjustments to level it.

All installation must be in accordance with local plumbing code requirements.

Make certain that pipes are not pinched, kinked or damaged during
installations.

Check for leaks after connection.

Although the unit has been tested at the factory, due to long-term transit and
storage, the first batch of ice cubes must be discarded.

Do not use solvent-based cleaning agents or abrasives on the interior. These
cleaners may damage or discolor the interior.

Do not use this apparatus for other than its intended purpose.
CAUTION: THIS APPLIANCE IS NOT DESIGNED FOR THE STORAGE OF
MEDICINE OR OTHER MEDICAL PRODUCTS.
SAVE THESE INSTRUCTIONS