22
Lexmark W812
(Fuji-Xerox XP-26)
Lexmark Cartridge Part # 14K0050
OEM Stated Yield: 12,000
These cartridges use a chip, but it is not the “Killer
type” These chips monitor the “Toner Low” as well
as tell the machine the brand of cartridge it is. So far
we have seen Lexmark, Epson, and IBM machines
using these cartridges. The chips for each brand are
different. Initial tests show that the chip can be re-
used for at least one cycle with no issues. Testing is
still ongoing.
Minolta PageWorks 8
Xerox Drum Cartridge Part # 106R42
OEM Stated Yield: 6,000
Sharp FO-4400/4450/DC5500 Toner Cartridge Part # FO-
55ND
There are many versions of PW8 drum cartridges,
but only those used in the WorkCentre pro 555/575
need to be reset. The reset procedure is as follows:
Press the “MENU” button, and then the numbers
“5”, “2”, “0”, and “4”
Press “1”
Press “ENTER”.
Press “STOP”
To replace the drum cartridge (click here)
(We do not have this particular machine so I do not
know exactly what that last line means. This
information is straight from Xerox.)
Sharp FO-55ND Toner Cartridge:
These
cartridges have a chip that must be replaced each
cycle. New replacement chips are available
Minolta PageWorks 1350
Minolta Drum Cartridge Part # 1710568-001
OEM Stated Yield: 20,000
There are a few different reset procedures for the
drum units, all dependant on the machine. All are
done either by the Printer menu, or through the
printer driver:
Minolta PageWorks 1350W:
Hold down the START/STOP and the
INFORMATION buttons while turning on the
printer. Hold them until the Ready (green) and Error
(red) lights turn on.
Epson EPL-6200:
Hold down the START/STOP and the
INFORMATION buttons while turning on the
printer. Hold them until the Ready (green) and Error
(red) lights turn on.
Epson EPL-6200L Windows:
Double click on the printers/faxes icon. Right click
the icon for this printer. Click on the PRINTER
SETTINGS button on the printer drivers
OPTIONAL SETTINGS menu. Then click on the
OPC LEVEL CLEAR or RESET OPC LEVEL
button. Click on OK, the printer is reset.
Epson EPL-6200L Macintosh:
Access the REMOTE CONTROL PANEL utility,
and then click SETTING. Click on the OPC LEVEL
CLEAR, PHOTOCONDUCTOR LIFE RESET or
RESET OPC LEVEL button. Click on OK, the
printer is reset.