12
HP LaserJet 1300
HP Part # Q2613A/X
OEM Stated Yield: 2,500/4,000
The HP-1300 uses the second generation black toner
cartridge ARD’s. These chips (ARD’s) only
monitor toner usage not page counts. Each chip also
has its own serial number which in effect gives the
cartridge a serial number. After the OEM toner has
been used up, the “toner low reached” code will be
set to YES on the cartridge chip. Even after the
cartridge is refilled, the printer display will still
show “Toner Low” for the supplies status section of
the menu. Since these machines do not have a
display, only the supplies status page will show
“Non HP Toner cartridge”. If the chip is removed,
the toner low sensors will be disabled, and will not
work again until a new HP cartridge is installed.
Replacement chips are available
HP LaserJet 1320/1160
HP Part # Q5949A/X
OEM Stated Yield: 2,500/6,000
The HP-1320/1160 uses the second generation black
toner cartridge ARD’s. These chips (ARD’s) only
monitor toner usage not page counts. Each chip also
has its own serial number which in effect gives the
cartridge a serial number. After the OEM toner has
been used up, the “toner low reached” code will be
set to YES on the cartridge chip. Even after the
cartridge is refilled, the printer display will still
show “Toner Low” for the supplies status section of
the menu. Since these machines do not have a
display, only the supplies status page will show
“Non HP Toner cartridge”. If the chip is removed,
the toner low sensors will be disabled, and will not
work again until a new HP cartridge is installed.
Replacement chips are available.
HP LaserJet 2300
HP Part # Q2610A
OEM Stated Yield: 6,000
The HP-2300 uses the second generation black toner
cartridge ARD’s. These chips (ARD’s) only
monitor toner usage not page counts. Each chip also
has its own serial number which in effect gives the
cartridge a serial number. After the OEM toner has
been used up, the “toner low reached” code will be
set to YES on the cartridge chip. Even after the
cartridge is refilled, the printer display will still
show “Toner Low” for the supplies status section of
the menu. Since these machines do not have a
display, only the supplies status page will show
“Non HP Toner cartridge”. If the chip is removed,
the toner low sensors will be disabled, and will not
work again until a new HP cartridge is installed.
Replacement chips are available.
HP LaserJet 2400
HP Part # Q6511A/X
OEM Stated Yield: 6,000,12,000
The HP-2400 uses the second generation black toner
cartridge ARD’s. These chips (ARD’s) only
monitor toner usage not page counts. Each chip also
has its own serial number which in effect gives the
cartridge a serial number. After the OEM toner has
been used up, the “toner low reached” code will be