SummerAire Proventor II Series, Инструкция по установке и устранению неисправностей

Страница: 5 / 28

4 5
1. OPTIONAL CONTROLS
20 Minute Remote Timer Touch Pad
Model ECPBT
This control is polarized. If wired incorrectly a fault will be
indicated at the HRV LED by a flashing RED light.
Once activated by a momentary push of the SELECT button on
the Touch Pad, the HRV is switched to high speed ventilation
and the Touch Pad LED will illuminate. The HRV will reset to
the previously selected mode of operation once the 20 minutes
have expired. To cancel the selection, depress (and hold for 3-4
seconds) the SELECT button on the 20-minute Touch Pad.
This 20-Minute Touch Pad MUST be connected to the “PTE”
and “GRD” terminals on the HRV exterior.
NOTE: The connections to this control are polarized. Be sure to
connect “B” to BLACK and “W” to WHITE at the control.
Connect WHITE to “PTE” and BLACK to “GRD” at the HRV.
INSTALL USING 18/2 THERMOSTAT WIRE.
MAXIMUM NUMBER OF ECPBT CONTROLS
PER HRV IS SIX.
MAXIMUM CUMULATIVE LEAD LENGTH IS
2000 LINEAR FEET.
NOTE: This control will not respond while a crank timer is
operational.