13. Felt battens Summer Garden Buildings – Hipped Summerhouse 270
Around the edge of the roof position the angled edges of the felt batten against the underside of the roof panel, have the front face of the batten level with the end of the
roof panel as shown. Secure in place using 4 x 25mm screws for the Long felt battens and 3 x 25mm screws for the short battens.
Cross section of wall
25mm
angled edge
Front face of the felt
batten is level with
Front face
Angled end of felt batten
Short felt
batten
14. Side roof panel roofing felt
the edge of the roof.
Short felt
batten
Felt batten
Position a large side roof panel felt centrally over the right roof side. Fold the lower edge down to cover the felt batten. Secure the felt to the felt batten using 10 x 10mm
felt nails evenly spaced. Tension the felt over the roof and secure along the upper edge using 3 x 10mm felt nail. Fold the front edge of the felt over the front roof panels
and secure using 6 x 10mm felt nails. Repeat for the back edge of the felt. Position a small side felt piece at the top of the right roof panels. Ensure that the lower edge
overlaps the large felt and the upper edge overhangs the roof centre block. Once in position secure the lower edge with 5 x 10mm felt nails, tension the felt and secure at the
top edge with 2 x 10mm felt nails. Fold the front and back edges over and secure each edge with 3 x 10mm felt nails. Repeat for the other side panel.
10mm
10mm
Felt nails
Felt
nails
15. Front and back roof panel roofing felt
Position a large Front/b
ally over the front roof panel. Fold the lower edge down to cover the felt batten. Secure the felt to the felt batten using
14 x 10mm felt nails ev
felt over the roof and secure along the upper edge using 5 x 10mm felt nail. Fold the ends of the felt over the side roof
panels and secure usin
osition a small Front/back felt piece at the top of the front roof panel. Ensure that the lower edge overlaps the large felt
and the upper edge ov
block. Once in position secure the Lower edge with 8 x 10mm felt nails, tension the felt and secure at the top edge with
4 x 10mm felt nails. Fold the ends of the felt over the side roof panels and secure each edge with 4 x 10mm felt nails. Repeat for the back roof panel.
10mm
10mm
Felt
Felt
nails
nails
For sales advice before you buy phone Summer Garden Buildings free 7 days a week on 0800 9777828
