___
Summation Technology
22
9-4. Show Image Info.
You can check the disc format and data size of image file in this function.
1. Pressing
/
to select 9. HDD Manager and sub menu 4. Show Image Info
.
2. Press
ENT
to check the disc format and data size of the image file. And you can press
/
to check other image file’s information.
9-5. Rename Image
This function allows you to change the name of image file. You can set maximum up to 8
characters for a new name, and NO blank is allowed between the characters.
1. Pressing
/
to select 9. HDD Manager and sub menu 5. Rename Image
.
2. Pressing
ENT
and select which image file you would like to rename by pressing
/
, and
then press
ENT
to start edit a new name for the selected file.
You can select characters or number by pressing
/
, and press
ENT
to the next space to
edit. The maximum is 8 characters without blank space. When it has done, press
ENT
to
confirm the new name.
9-6. Delete Image
You can delete image file from the built-in HDD, but the source image file is unable to delete if
the file is selected as source. Therefore, before you delete an image file, please check if it is
selected as a source and change a new one source by 9.1 Select Image
, page 21.
**Note: If there is an image file is deleted, the file name will be held for next new image file, the
existing file will not to fill the vacancy. For example, there are 5 image files
(A001~A005) in the HDD, when you delete A003, A004 will not change to A003, once
a new file has loaded, its default name will be A003.
