___
Summation Technology
10
Chapter 6. Operation Guide
1. Copy
It is important to make sure that your source disc is placed in the right drive. The default
source is your top drive. You can check or select your source reader by checking function 6.
Select Source
. (Please refer to page 12)
1. Select 1. Copy
and place source disc and blank discs into the proper trays. The system will
detect the source disc and show the information.
2. Press
ENT
to start copy
3. Once the copy task is finished, the copied discs will be ejected and the result of copy task
will show on the LCD:
**Note:
Due to the default setting of auto start time, the duplicator will start to copy automatically
within a few seconds. You can set the Auto Start Function to “OFF” to close the auto start
function or set a longer waiting time. The default setting is 5 seconds. (For more info about this
setting please refer to 8-1. Auto Start Time, page 17)
If the HDD is selected to be the source, you have to load the source image to the built-in HDD
and then execute the Copy process. Please refer to 9-2 Disc to Image (Page 21) for
instructions on how to load from Disc to HDD.
