___
Summation Technology
18
7-8. PRINT LS Label (Optional)
This function will let you use the Lightscribe technology to print your own image on discs. This
is an optional function which requires special Lightscribe writers.
8. Setup
8-1. Auto Start Time
This setting will allow the system to do the Copy, Test, Compare and Copy + Compare
functions automatically in a few seconds once the source and blank discs are placed in the
tray and detected by the system. The default setting is 5 seconds. You can set a longer/shorter
time from 1 to 99 seconds or set OFF to disable this function and execute copy task by manual.
1. Pressing
/
to select 8. Setup and sub menu 1. Auto Start Time
.
2. Pressing
/
to set the time.
8-2. Display Mode
You can select the preferred display mode in Copy, Test, Compare, Copy+Compare.
Basic:
It will only show the copy process (%) on LCD.
Show Timer:
It will show the time for copy.
Show Speed
: It will show the speed of burning during copy process.
8-3. Button Beep
This setting will allow you to set up the LCD to hear a beep when a button is pressed on the
control panel.
