manualshive.com logo in svg

Summa SUMMACUT, Руководство пользователя

Поделиться
Скачать
Summa SUMMACUT Скачать руководство пользователя страница 26

SummaCut cutter 

 

User’s Manual 

Setup  

1-17 

7.

 

Make sure that the media follows a straight path from the roll of material. To accomplish 
this, slide the media roll and flange guides from the left to the right along the media 
support rollers. 

 

WARNING 

KEEP FINGERS AND OTHER BODY PARTS AWAY FROM THE CUTTING AREA. THERE 

ARE HAZARDOUS MOVING PARTS

. 

 

 

8.

 

Lower the pinch roller lever to press the media firmly against the drive sleeves. After 
one second the tool carriage automatically moves from the right to the left to sense the 
usable media width. 

 

FIG 1-21 

1-21

 PINCH ROLLER LEVER 

 

NOTE: 

It is not recommended to unroll the media manually from the roll. The cutter will 

unroll the media automatically during the load sequence. 

 

9.

 

The positioning and routing of sheet material is identical to that of roll media. 

10.

 

The cutter is now ready. 

 

Содержание SUMMACUT



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды