7-
3
7. Other convenient functions
｜
Fiber holder operation
7. Other convenient functions
❚
Fiber holder operation
You can use fiber holders for single fiber to splice fibers by removing the
coating clamp. Sumitomo FHS series fiber holders are applicable.
1: Loosen the coating clamp fixing screw
to remove the coating clamp.
Coating clamp
2: There is a holder stage under the
coating clamp. A fiber holder can be
placed on the holder stage.
■
Fiber holder operation with the back monitor type
When the fiber holder is used with the monitor in the back position, your splicing
work is easier if the direction of opening of the fiber holder lid is changed. Refer
to the following procedures.
1: Loosen the holder stage fixing screw
to remove the holder stage.
2: After swapping the right-hand and
left–hand holder stages, tighten the
holder stage fixing screw. The lid of
the fiber holder is opened in the
same direction as the front monitor
type.
Fiber holder
FHS-025
Holder stage
Coating clamp fixing screw
Holder stage