Sumitomo Drive Technologies PARAMAX SFC Series, Руководство по эксплуатации и техническому обслуживанию

Страница: 5 / 14

4
4-2 Installation of gear box
The mounting base must be horizontal and level.
4-1) Location of installation
Ambient temperature : 0 to +40
(+32 to +104
Ambient humidity : 85% max.
Ambient atmosphere : There shall be no corrosive gas, explosive gas.
The installation space shall be well ventilated, and free from dust.
Location of installation : Indoors or outdoors.
. Special specifications are necessary when installation conditions are other than those mentioned here.
In such cases contact the nearest agent, dealer or service office.
. When a product is made according to special specifications for outdoor use or use in explosive
environments, the product can be safely operated under those specified conditions without problem.
(Air vent or air breather must be located outside of fan stack with extended piping)
Table1 Torque of the installation bolts
Unit SFC060 SFC065 SFC070 SFC075
Bolt Size
−
M30 M36
Torque
N
･
m 1400 2430
Size
in
･lbs
12390 21510
. Install PARAMAX DRIVE FOR AIR COOLED CONDENSERS on a sufficiently rigid base.
. Use installation bolts corresponding to JIS strength class 8.8 or its equivalent. The torque of installation bolts is
shown in table1.
5. Coupling with other machines
CAUTION
Install appropriate guard devices around rotating parts ; otherwise, injury may result.
Correctly tighten respective bolts to the specified torque shown in the drawing, catalog, etc. ; otherwise ;
scattering fragments may damage the system.
IF a backstop is installed in the reducer, verify that the applied motor rotation direction is correct.
Difference in the direction of rotation may cause injury or damage to the system.
C C F) F
When coupling PARAMAX DRIVE FOR AIR COOLED CONDENSERS with a load, confirm that the alignment
error is within the specified limits shown in the maintenance manual, drawings, catalog, etc. ; otherwise,
damage to the system may result, due to misalignment.
Remove the key temporarily attached to the output shaft of PARAMAX DRIVE FOR A I R C O O L E D
CONDENSERS when the shaft is free-rotating (i. e. not loaded) ; otherwise, injury may result.