Sumitomo Drive Technologies PARAMAX SFC Series, Руководство по эксплуатации и техническому обслуживанию, Страница: 2 / 14

1
Matters described in may lead to serious danger depending on the situation. Be sure to observe
important matters described herein.
DANGER
Transport, installation, plumbing, operation, maintenance, and inspections should be handled by properly
trained technicians ; otherwise, injury or damage to the machine may result.
Do not disassemble PARAMAX Drives FOR AIR COOLED CONDENSERS during operation. Even if it is at
disassemble any parts other than the oil inlet/outlet when the input/output shafts of the PARAMAX
DRIVE FOR AIR COOLED CONDENSERS is connected to a motor or other mating machines; otherwise falling
or operation out of control due to disengagement of gears, as well as death, injury, or damage to the machine may
result.
Carefully read this maintenance manual and all accompanying documents before use (installation, operation,
maintenance, inspection, etc.). Thoroughly understand the machine, information about safety, and all precautions for
correct operation.
Maintain this manual for future reference.
Pay particular attention to the "DANGER" and "CAUTION" warnings regarding safety and proper use.
DANGER
CAUTION
The unit should be operated only within its design and performance specifications ; otherwise, injury or
damage to a system may occur.
Keep hands and all foreign objects from the internal moving parts of the unit ; otherwise, injury or damage to
a system may occur.
Damaged units should be taken off - line and not put back in operation until properly repaired.
Any modifications or alterations of any kind, to the unit, will void the warranty and all subsequent claims.
Do not remove the rating plate.
CAUTION
CAUTION
CONTENTS
Safety and other precautions.......................1
1. Inspection upon delivery ............................ 2
2. Storage....................................................... 3
3. Transport .....................................................3
4. Installation .................................................. 3
5. Coupling with other machines .................... 4
6. Lubrication.................................................. 5
7. Backstop..................................................... 6
8. Operation ................................................... 7
9. Daily inspection and maintenance ............. 8
10. Troubleshooting ......................................... 9
11. Disassembly/reassembly and disposal ...... 9
12. Construction drawing ............................... 10
13. Locations of oil filler and drain plug ...........11
14. Warranty................................................... 12
Oil has been removed from PARAMAX DRIVE FOR AIR COOLED CONDENSERS before shipment from our
factory, so supply recommended oil before use.
: Improper handling may result in physical damage, serious personal injury and/or
death.
: Improper handling may result in physical damage and/or personal injury.
(Safety and other precautions)
rest, do not