Sullair SM-1100N, Инструкция по установке и обслуживанию

Страница: 5 / 24

3
2. TECHNICAL SPECIFICATION
Type:
Model:
Outlet Dewpoint:
Air Quality:
(dirt/water/oil):
Maximum Operating Pressure:
Minimum Operating Pressure:
Maximum Inlet Temperature:
Minimum Inlet Temperature:
Regeneration:
Nominal pressure drop
across desiccant bed:
Standard Electrical Supply:
Controls:
Controller:
Noise Level (Average):
Media
Material:
Construction:
Pre filtration:
After filtration:
A) GENERAL
-40°C (-40°F)
-70°C (-100°F) - optional
ISO 8573.1 Class 1.2.1
Class 1.1.1 optional
10.5 bar g (152 psi g)
4 bar g (58 psi g)
50°C (122°F)
5°C (41°F)
Control equipment 24V ac.
SM electronic - SMART
<75db (A)
Desiccant
High tensile extruded aluminium coated with Alocrom anti-corrosion
protection and paint finished with an abrasion resistant dry powder epoxy
coating.
The Dryer is constructed from extruded aluminium sections connected
together by high tensile bolts i.e. desiccant filled columns are contained
between an upper and lower manifold. The configuration varies between
the heatless and heat regenerative models as shown in figures 1 & 2
MPH / MPF filters
MPR filter
140 m bar (2 psi)
Heatless
SM
Pressure Swing Adsorption (PSA)
[Air Purge Principle]
110/230V/1ph/50Hz/60H