manualshive.com logo in svg

Sullair LS16T, Руководство оператора и списки запасных частей


Поделиться
Скачать
background image

Section 2

DESCRIPTION

22

2.7 AIR INLET SYSTEM, FUNCTIONAL DESCRIP-

TION

Refer to Figure 

2-5

. The 

Compressor Inlet System

consists of a 

dry-type air filter

, a

vacuum switch

,

and an 

air inlet valve

.

At 20” water column the inlet vacuum switch will
allow the Supervisor II to indicate that “AIR FILTER
MAINT RQD”  is required.
The poppet-type air inlet valve directly controls the
amount of air intake to the compressor in response
to the operation of the controls (see 

Section 2.6

,

Control System, Functional Description

).

2.8 SUPERVISOR II PANEL BASIC INTRODUCTION

Refer to Figure 

2-6

. The Supervisor II has a two line

display to show temperature, pressure and status. It
has a keypad for operating the compressor, pro-
gramming the control points and selecting displays.
There is a graphic illustration with lamps that light to
show the item being displayed. The lamps flash if
that component is in an alarm condition.

2.9 KEYPAD

The keypad is used to control the machine as well
as display status and change setpoints. Refer to
Figure 

2-6

 for following key descriptions.

• Stop

- Used to put the machine into manual

stop. It is also used to clear alarm condi-
tions. 

• Continuous 

- Starts machine if no alarm

conditions are present. Also used to clear
alarm conditions while machine is running.

• Auto

- Starts machine and selects auto

mode if no alarm conditions are present.
Also used to clear alarm conditions while
machine is running.

• Display 

- Used to display pressures, tem-

peratures and other status information (See
section on STATUS DISPLAYS).

• Logo

- Used for various functions described

in later sections.  

• Program

- Used to enter the parameter

change mode where control parameters
may be displayed and changed (See PARA-
METER SETUP).

• Up arrow

- Used in status displays to

change displays and in parameter setup
mode to increment a value.

• Down arrow, lamp test

- Used in status dis-

plays to change displays and in parameter
setup mode to increment a value. When in
the default display the key will light all the
lamps for three seconds.

Figure 2-5 Air Inlet System

Содержание LS16T

















































































































Отзывы:

Нет отзывов

Похожие инструкции для LS16T

Compass MAMUT Instructions For Use Manual preview
MAMUT
Бренд: Compass Страницы: 8
North Star M51481A Owner'S Manual preview
M51481A
Бренд: North Star Страницы: 18
ULTIMATE SPEED USKT 60 A2 Operation And Safety Notes preview
USKT 60 A2
Бренд: ULTIMATE SPEED Страницы: 122
York YCAS0250-0440 60 HZ Start-Up Checklist preview
YCAS0250-0440 60 HZ
Бренд: York Страницы: 9
Würth 0701 224 0 Translation Of The Original Operating Instructions preview
0701 224 0
Бренд: Würth Страницы: 268
Porter-Cable CPLC7060V Instruction Manual preview
CPLC7060V
Бренд: Porter-Cable Страницы: 26
Porter-Cable CPFAC2040P Instruction Manual preview
CPFAC2040P
Бренд: Porter-Cable Страницы: 14
Porter-Cable C2000 Instruction Manual preview
C2000
Бренд: Porter-Cable Страницы: 18
Porter-Cable 1000003754 Instruction Manual preview
1000003754
Бренд: Porter-Cable Страницы: 64
KingCraft 6923-05 Instruction Manual preview
6923-05
Бренд: KingCraft Страницы: 21
Kohler LOMBARDINI AB598 Installation, Use And Maintenance Manual preview
LOMBARDINI AB598
Бренд: Kohler Страницы: 100
Alto CLE4.0 User Manual preview
CLE4.0
Бренд: Alto Страницы: 14
Atlas Copco APF221384 Original Instruction Book preview
APF221384
Бренд: Atlas Copco Страницы: 86
Mouvex 15L Operation, Maintenance And Safety Instructions preview
15L
Бренд: Mouvex Страницы: 16
Superex 50-174 Instruction Manual preview
50-174
Бренд: Superex Страницы: 6
Danfoss SH 090 Instructions Manual preview
SH 090
Бренд: Danfoss Страницы: 28
GEA HGX12P CO2 Assembly Instructions Manual preview
HGX12P CO2
Бренд: GEA Страницы: 32
Lincoln 3650 User Manual preview
3650
Бренд: Lincoln Страницы: 21

Бренды по названию

Популярные бренды

Загрузить еще бренды