1.2
1.1
1.3
1.4
1.5
1.1
Hydrolysis:
Programming of low salinity
electrolysis functions.
1.2
Level:
Desired
production of
chlorine (%).
1.3
Cover:
Connection of
automatic cover.
Reduction
of chlorine
production in percent, when
the pool cover is closed.
1.4
Boost:
Continuous
filtration during 24 hours
at maximum intensity.
Automatic return to
programmed filtration mode.
1.5
During the
boost period the
redoX control can
be deactivated.
4.1 Hydrolysis
4.2
Measures
2.1
2.2
2.3
2.4
2.5
2.7
2.8
2.6
2.12
2.13
2.9
2.10
2.11
2.14
2.15
2.1
Measures:
Adjustment of setpoints and
measuring probes.
2.2
Setpoints
for each measurement.
2.3
Setting of setpoints.
2.4
Calibration of pH probe:
Recommended every month during
usage season.
2.5
Calibration with buffers
(buffer
solutions pH7 / pH10 / neutral): Follow
the instructions which appear on the
displays (fig. 2.6).
2.7
Manual calibration:
Allows to
adjust the probes at 1 point (without
buffers) – only recommended to
adjust small deviation in the readings.
2.8
Without removing
the probe from the
water, use the
plus/
minus
keys to adjust the
reading so it matches
with your reference value
(photometer or other
measurement).
2.12
Manual calibration:
Allows to adjust
the probes at 1 point (without buffers) – only
recommended to adjust small deviation in
the readings.
2.13
Without removing the probe from the
water, use the
plus/minus
keys to adjust the
reading so it matches with your reference
value (photometer or other measurement).
2.15
Temperature calibration:
To set the difference between the
measured value of the probe and
the actual temperature, use the
plus/minus
and
up/down
keys.
Set to the actual temperature of
the probe and press OK.
2.9
Calibration of the redoX
probe:
Recommended every 2
months during usage season.
2.10
Calibration with buffer
(buffer liquid 465 mV): Follow
the instructions which appear
on the displays (fig. 2.11).
You can access
the display “Filter
cleaning” from any
filtration mode.
Once selected this
function, press the
OK key.
4.3
Filtration
3.1
Filtration modes
3.2
Manual:
Filtration can be switched ON and OFF manually.
3.3
Automatic (or with timer):
In this mode the filtration
switches ON/OFF according to 3 timers. The timers always
work on daily bases.
3.4
Smart*:
This mode uses, as a basis, the automatic or
timer mode, with its 3 intervals of filtration, but adjusting
the filtration time in function of the water temperature. For
that reason 2 parameters of temperature are provided: The
maximum temperature, from which on the filtration times will
be the ones from the timer setting. The minimum temperature:
below this value the filtration time will be reduced to 5
minutes, which is the minimum working time. Between these
2 temperatures the filtration times will climb linearly. There
is an option to activate the antifreeze mode in which the
filtration will start if the water temperature is below 2° C.
3.5
Timed heating with option of climatization*:
This mode
acts equally to the automatic mode, but besides it includes
the option to work on a relay to control the temperature.
The desired temperature is set in this menu, and the system
works with a hysteresis of 1 degree (example: the setting
temperature is 23° C, the system will activate itself when
the temperature goes below 22° C and will not stop before it
passes 23° C).
3.7
3.1
3.2
3.3
3.6
3.5
3.4
