Subtronic Pro 160 Fusion, Руководство пользователя

Страница: 10 / 20

cable – connections
in open conditions the plugs and connectors should be always closed. All seal-rings on the
connectors and all windings have to be lightly greased every time. Control the exact
direction of the connector before you plug in.
Clean the contacts immediately if they are penetrate by sea water. Extremely necessary in
TTL-Mode.
•
If you use a defective cable or defective connectors water can break in the
system
 NEVER DIP THE UNITS WITHOUT CAPS OR MOUNTED CABLES INTO THE
WATER
flash arm connector
The flash arm connector on the bottom side of the system contains two threads.
One of them is M8 and the other one tripod winding.
If you use no original subtronic screws, be sure that the length of the screw is less
than 8mm. Longer screws can damage the mountingplate
Our arm system is connected directly with a M8 screw on the bottom side of the flash unit.
subtronic arm system, Point-shooting adapter
10