Subaru EyeSight, Руководство пользователя

Страница: 84 / 176

Advanced Adaptive Cruise Control
84
 Resuming Adaptive Cruise Control in stay-stopped status
Setting using the RES/SET switch
Even when the vehicle in front remains stopped, Adaptive Cruise Control can be activated
by operating the RES/+ switch or SET/- switch.
(HOLD indicator) and (READY
indicator) turn off, and (Adaptive Cruise Control indicator) changes from white to
green.
•
Press the SET/- switch. The speed is automatically set to 20 mph (30 km/h).
•
Press the RES/+ switch. The vehicle speed that was set before the stay-stopped function
activated is set again.

Page 90
Setting with the accelerator pedal
Depressing the accelerator pedal while stay-stopped is engaged cancels stay-stopped sta-
tus. At this time, Adaptive Cruise Control is resumed. The vehicle will attempt to travel at the
previously set vehicle speed unless a lead vehicle is detected. If a lead vehicle is detected,
Adaptive Cruise Control will maintain the previous following distance setting.
NOTE
•
When Adaptive Cruise Control is resumed from stay-stopped status and the
vehicle in front accelerates, your vehicle will also accelerate and continue to
follow the vehicle in front at the previously set following distance. However, if
the lead vehicle does not start moving or pauses, stay-stopped status will be
automatically restored after approximately 3 seconds.
•
While the engine is automatically stopped by the stay-stopped function* and
Adaptive Cruise Control is activated, the engine automatically restarts and the
Auto Start Stop indicator turns off when the vehicle in front starts moving.
*: The Auto Start Stop system activates following activation of the stay-
stopped function.
WARNING
When the stay-stopped function is canceled, the vehicle will start. Make sure the
surroundings are safe before canceling the stay-stopped function.
B8312BE-A.book 84 ページ ２０２１年５月３１日 月曜日 午後３時２０分