Subaru EyeSight, Руководство пользователя

Страница: 149 / 176

Conventional Cruise Control
149
●
Automatic cancellation by the system
In the following cases, a notification sounds 1
short beep and 1 long beep and the cruise
control function is automatically canceled.
(Conventional Cruise Control indicator)
changes from green to white. Also, the Con-
ventional Cruise Control cancellation mes-
sage is displayed on the screen.
After the conditions listed below have been
resolved, perform the cruise control set opera-
tion again to reactivate cruise control.
• The select lever is moved to a position
other than “D” or “M” (models with manual
mode).
- Conventional Cruise Control can be resumed after the select lever is returned to the “D”
or “M” position.
• Vehicle speed drops to approximately 16 mph (25 km/h) or less (due to a steep uphill
grade or some other reason).
•
The X-MODE is turned on (the X-MODE indicator illuminates). (if equipped)
- Conventional Cruise Control can be resumed after the X-MODE is turned off.
•
Vehicle speed increases to approximately 100 mph (160 km/h)* or more.
*: For Mexico models, 220 km/h.
• The Vehicle Dynamics Control or the Traction Control Function is activated.
• Any door (except the rear gate) is opened.
•
The driver’s seatbelt is unfastened.
•
The electronic parking brake is engaged.
• The EyeSight system has a malfunction. (EyeSight warning indicator: Yellow)
 Page 155
• The steering wheel is turned significantly in either direction.
• The grade of the road is steep.
•
The Pre-Collision secondary braking is activated.
•
The accelerator pedal was depressed continuously for a long time.
• The engine speed increased to a high rpm.
WARNING
Do not use Conventional Cruise Control on slippery roads. Doing so may result
in an accident.
S03041
White
B8312BE-A.book 149 ページ ２０２１年５月３１日 月曜日 午後３時２０分