Subaru EA190V, Руководство по обслуживанию

Страница: 42 / 52

42
4-3-9 Crankcase cover/governor gear
NOTICE
· Don
’
t reuse the crankcase gasket.
· Oil seal: a) Don
’
t reuse, b) Apply the lubrication oil on the lip when using, c) Put the oil seal into the
crankcase cover with special tool, don
’
t damage the edge of the oil seal, d) Apply the special
lubrication oil onto oil seal after assembling.
· Don
’
t reuse the oil drain plug washer, as can as possible use new one.
· Bolt
（
M6×30): Loosen and tighten the bolts in a crisscross pattern, Especially when tightening, all bolts
should be tightened gradually and evenly up to specified torque. Bolt torque
：
10
。
±2N.m
· Governor gear: First, check governor gear for worn and damaged, then, assemble it.
· Governor spindle clip: Firmly insert into the groove of the shaft when assembling.
· Governor slider: Insert the governor slider into the governor spindle and check the governor slider for
turning freely.
No. Description No. Description
1 Gasket 9 Governor gear
2 Dowel-A type 10 Governor flyweight
3 Oil seal
Φ
27×
Φ
42×7 11 Flyweight spindle
4 Drain plug 12 Spindle clip
5 Washer (
Φ
10×
Φ
15.8×1.5) 13 Spacer
6 Crankcase cover 14 Governor slider
7 Bolt (M6×30) 15 Washer (
Φ
37×
Φ
27.4×1)
8 Bolt (M6×16)