Subaru EA190V, Руководство по обслуживанию

Страница: 19 / 52

19
3-7 Governor adjusting
●
Governor adjusting
：
(1) Dismount the air cleaner
(2) Loosen the nut M6. Be sure that the carburetor throttle valve is fully open
(3) Rotate the governor arm shaft fully to the right (governor fully open position) to bottom by pressing
governor support, and retighten the nut., torque value: 10N.m
(4) Check to see that the governor support and throttle valve move freely.
(5) Check the maximum engine speed
●
Adjusting speed
：
Don
’
t adjust the speed because it is fixed speed. If necessary, please have it to the theorized dealer for
adjusting. If the user has an proper tools and repairing capacity, only permit the following operation:
(1) Start the engine and allow it to warm up to normal operating temperature.
(2) If the maximum speed is not conformed to specified value, adjust throttle control and hole position of
the support by adjusting governor spring.
EA190 engine maximum speed
：
3800±100rpm
WARNING:
The engine has adjusted to specified speed when manufactured in the factory, if the wrong adjusted from
the user to cause the performance of the engine, it is not covered the warranty of our company.
Governor support
Throttle valve
Governor arm
Nut M6
Throttle control assy.
Governor spring